Skip to content
WS Painting & Remodeling
Call

Deck & Fence Staining in Roswell, GA

Raised pressure-treated decks are common on Roswell's 1980s houses, often a full story up over a walk-out basement in Horseshoe Bend, Saddle Creek and the creek valleys. Under heavy tree cover they collect leaves, pollen and mildew, and the old finish is often a mix of solid and semi-transparent coats. Staining here means cleaning, stripping failed coats and picking a product the boards can still absorb, with soft wood flagged first.

Fulton County · Roswell, GA

Get a free estimate

Step 1 of 3

What do you need? * Pick all that apply

Free and no obligation. We never sell or share your details.

Deck & Fence Staining for Roswell homes

Roswell's population multiplied between 1970 and 2000, and the housing records that growth. Martin's Landing and Brookfield Country Club date mostly to the late 1970s; Horseshoe Bend, Saddle Creek, Loch Highland and Wildwood Springs filled in through the 1980s; Barrington Farms and Edenwilde followed in the 1990s. Much of that stock is wood-sided or wood-trimmed, with cedar, hardboard and brick fronts, and the rolling ground that falls toward the river and the creeks gives many lots a slope and a walk-out basement. Older still is the historic district: the Mill Village around Sloan Street, where some millworker housing dates to the 1850s, and the blocks along Canton Street and Mimosa Boulevard, with old wood, plaster and many layers of earlier paint. Newer infill townhomes, such as Harlow and Ashbury, are the exception rather than the rule. For painting and remodeling that adds up to a lot of carpentry before paint, decks and siding at replacement age, and kitchens and baths on their first or second remodel.

Areas we work in Roswell

  • Martin's Landing
  • Horseshoe Bend
  • Brookfield Country Club
  • Barrington Farms
  • Saddle Creek
  • Mill Village

Near Bulloch Hall, Barrington Hall, Roswell Mill ruins and the Vickery Creek trails and across the rest of Roswell.

Recent deck & fence staining work

Photos from recent WS Painting & Remodeling jobs across the metro.

Deck & Fence Staining on Roswell houses

Roswell's 1980s subdivisions built a lot of pressure-treated decks off the backs of houses, and on sloped lots in Horseshoe Bend, Saddle Creek and along the Big Creek and Vickery Creek valleys those decks often stand a full story up, over a walk-out basement. They sit under heavy tree cover, so they collect leaves, pollen and mildew, and the old finish is usually a patchwork of solid and semi-transparent coats from different owners. Backyard privacy fences age the same way under the canopy. The work is mostly cleaning, stripping failed coats and choosing a stain the wood can still absorb, after flagging the boards that are too far gone.

What usually gets missed

The common mistake is brushing semi-transparent stain over a deck that once had a solid stain. It will not soak in, and it peels in patches by the next summer. We figure out what is already on the wood, strip it where needed and let the boards dry. On tall decks the stain is the easy part: the ledger, joist ends and stair stringers get checked from underneath, because a shaded deck can look fine on top and be soft below.

On a Roswell job we check

  • Identify the existing coating before choosing the new stain
  • Check the ledger and joist ends from below on raised decks
  • Replace soft boards and loose rails before any stain goes on

5.0 from 44 Google reviews. A supervisor runs every job on site.

Get a free estimate

Step 1 of 3

What do you need? * Pick all that apply

Free and no obligation. We never sell or share your details.

(470) 419-0922

What the job actually involves

In Georgia, a wood deck or fence takes sun, rain, pollen and mildew all year. Stain only lasts if the wood is clean, dry and open enough to absorb it.

We use a penetrating exterior wood stain with UV and mildew resistance, plus a wood cleaner and brightener beforehand, because a stain applied over dirty or damp wood fails early.

How we run a deck & fence staining job in Roswell

  1. 1

    Inspect and repair

    We check for loose boards, popped nails, rotted rails, wobbly posts and splintered edges. Screws replace failing nails. Bad boards are flagged for replacement because stain will not fix structural problems.

  2. 2

    Clean and strip

    Mildew, dirt and the old failing finish are removed with a wood cleaner or stripper and a controlled wash. Too much pressure fuzzes the wood and gouges soft boards, so we keep it moderate and follow the grain.

  3. 3

    Brighten and let it dry

    A wood brightener evens out the color and restores pH after stripping. The wood then has to dry before staining. That is often a couple of days, longer after rain or in humid stretches. Staining damp wood traps moisture and causes peeling.

  4. 4

    Sand rough spots

    Handrails, steps and splintery boards are sanded smooth. Fresh sanding opens the grain so stain soaks in evenly.

  5. 5

    Apply stain

    Stain goes on with a sprayer, brush or pad, worked into the grain and back-brushed so it does not pool. Boards are done full length to avoid lap marks, usually one coat of penetrating stain or two thin ones depending on the product.

  6. 6

    Cure and cleanup

    We keep traffic off until it is dry to the touch, typically a day, and longer for full cure. Overspray on siding, concrete and plants is cleaned or masked ahead of time.

What moves the price

We will not quote Roswell blind over the phone — these are the things we look at on site that decide the number.

  • Total square footage of deck surface and rails, or linear feet and height of fence.
  • Existing finish. Old solid stain or paint takes more stripping than a bare or lightly weathered surface.
  • Condition of the wood, including how much sanding and board replacement is needed.
  • Stain type: clear sealer, semi-transparent, or solid color.
  • Ground-level versus elevated work, and details like spindles that take more brushwork than flat boards.
  • Whether both sides of a fence are done.

From a deck & fence staining customer

“They showed up on time and days The crew very easy to work with and did fantastic job. … The budget was great and no surprises.”
Robin Tarpley
Siding, exterior paint and fence stain
All 44 reviews →

Want a real number for your Roswell deck & fence staining job?

The only way to price it honestly is to see it. We come out, walk the job and put it in writing — free, and with no obligation to book.

Call and we answer 24/7. Forms sent during the day get a call back the same day.

Deck & Fence Staining in Roswell — questions we get asked

How often does a deck or fence need restaining in Georgia?
It varies with the product and sun exposure. Horizontal surfaces like deck floors wear fastest. If water no longer beads on the wood, it is time to restain.
How long is the deck off limits?
Plan on a few days around the work, mostly drying time. Foot traffic can usually return in a day after staining, with furniture waiting a bit longer.
Can you stain over old stain?
Sometimes. If the old finish is intact and the new stain is compatible, yes. If it is peeling, it has to come off first.
What if it rains?
We postpone. Stain needs dry wood and dry weather for several hours afterward. Summer storms in the afternoon often shape our schedule.
Do I need to move my plants and grill?
Yes, please clear furniture and move potted plants. We cover nearby shrubs and the house siding.

Prefer to talk it through? Dan picks up.

(470) 419-0922

Like our work? Get a free written estimate for yours.

Call (470) 419-0922 Free Estimate